Zubehör

The racks are designed as a closed cabinets. To enable access to the installed equipment, the racks are fitted with doors, rear or side panels. Customers can choose from as many as 15 types of paneling.

The racks are designed as a closed cabinets. To enable access to the installed equipment, the racks are fitted with doors, rear or side panels. Customers can choose from as many as 15 types of paneling.

The Premium series cabinets were designed as a flexible solution, enabling variability and exchangeability of all parts of the cabinet casings, including the top and bottom cover.

A unique combination of 19" rails with many advantages.

Fixed shelves are the basic option for equipment that is not fitted with 19" mounts. The shelves are perforated over their entire surface for effective air flow.

Fixed shelves are the basic option for equipment that is not fitted with 19" mounts. The shelves are perforated over their entire surface for effective air flow.

Fixed shelves are the basic option for equipment that is not fitted with 19" mounts. The shelves are perforated over their entire surface for effective air flow.

Pull-out shelves can hold equipment without 19" mounts. The pull-out system makes the equipment easily accessible. The shelves are perforated over their entire surface for effective air flow.

Pull-out shelves can hold equipment without 19" mounts. The pull-out system makes the equipment easily accessible. The shelves are perforated over their entire surface for effective air flow.

Holders are intended for holding a keyboard or monitor. A drawer is designed to store drawings, technical documentation, etc. directly in the cabinet.

Load supports are used to stabilize equipment in PREMIUM, OPTIMAL and iSEVEN series rack cabinets.

Optical trays are used to terminate optical cables in the cabinet. We also offer various types of modular panels and other optical accessories.

Patch panels are attached to 19" vertical rails and allow the termination of data or telephone cables to different types of modules.

All CONTEG cabinets include a basic grounding kit in the standard configuration.

All CONTEG cabinets include a basic grounding kit in the standard configuration.

All cabinet doors are fitted with a locking mechanism. This ensures protection against unauthorized access to the installed equipment.

Plinths are used as an aesthetic and stabilizing element of rack cabinets. This is an alternative to the standard height-adjustable legs or optional castors.

All CONTEG cabinets include a basic grounding kit in the standard configuration.

Load supports are used to stabilize equipment in PREMIUM, OPTIMAL and iSEVEN series rack cabinets.

In the standard configuration, CONTEG rack cabinets are supplied with height-adjustable feet. Optionally, the feet can be replaced with castors or plinths.

The mounting kit is used to attach 19" technology to vertical rails with this spacing.

Linings for sharp edges of cable inlets. Anti-dust plugs significantly reduce the amount of dust entering the cabinet.

The lighting unit with a motion sensor is equipped with a magnet and can therefore be easily placed anywhere in the cabinet.

Patch panels are attached to 19" vertical rails and allow the termination of data or telephone cables to different types of modules.

Eccentric rails can be installed in RDF and RSF cabinets (800 mm wide only) with U-bars for 42U and 45U cabinets.

Connection sets are used to connect rack cabinets of the same height and depth into one row

Cross beam for frames with four posts - 2mm sheet metal.

Binding panel for four-post frames to route and secure cables between two pairs of 19" rails.

Stabilizer for two- and four-post frames

3 types of patch panels

Accessories for SOHO Mini REH 10" – blanking panel.

Accessories for SOHO Mini REH - binding panel.

For use with modular front panel (ORS-08ST, ORS-08SC, ORS-04DSC, ORS-08FC, ORS-04FCD).

Expander enabling easy addition of 16 optically isolated inputs to the RAMOS Ultra, RAMOS ACS and RAMOS Optimax monitoring solutions.

Expander enabling an easy addition of 8 intelligent ports to the RAMOS Ultra, RAMOS ACS and RAMOS Optimax monitoring solutions.

USB Modem including audio cable (4-band GSM)

Discontinued product Temperature sensor for placement inside cabinets. Up to 8 sensors can be chained to a single smart port.

The expander expands the intelligent port with 8 additional inputs/outputs.

Relay Box 8 creates 8 relay outputs from a single intelligent port.

The sensor detects the presence or absence of flowing air inside the cabinet.

A siren with a flashing light serves as a visual and acoustic alarm for the operator.

Smoke detector is an essential security element of data centers and server rooms.

The RJ45-RJ-45 connector (category 5e) is used to extend the sensor cable.

A spot flooding detector indicates the presence of water in a given location.

The input/output contact is used for reading or controlling connected external devices, e.g. security or fire systems.

Water rope sensor with 3 m long detection cable protects water-sensitive equipment inside the cabinet from potential destruction.

The magnetic contact serves as a monitoring element that detects opening of the cabinet. Can be applied not only to the doors but also to the side panels.

Controlled output is used to control the supply of power to external devices.

The 4-20mA converter is used to integrate industrial sensors with an analog signal.

Temperature sensor with 30 cm long cable

Temperature and humidity sensor with a 30 cm long cable.

A water rope sensor-based flood detector with localization is able to detect the presence of water and determine the location of the leak.

Encased extendable sensor for placement inside cabinets, measures temperature and humidity.

The expansion unit for Ramos Optimax allows daisy-chaining via the BEX port and adds an additional 8 smart ports and 10 digital inputs.

Sensors for comprehensive monitoring of the environment inside cabinets. Helps detect hotspots and adjust IT hardware placement, cooling unit performance, etc.

The adapter enables connection of external analog sensors with an output signal of 0-10 V DC.

The display shows up to 8 parameters from any intelligent or virtual sensor, and measures 1 temperature.

A motion sensor is a security element detecting movement in the monitored area.

The adapter converts a MOD/EXP port on the RAMOS Optimax main monitoring unit into a serial Modbus port.

The device allows to adjust the voltage level of the signal.

including the door contact, enables direct connection to the intelligent port of the RAMOS Optimax or RAMOS Plus main monitoring unit.

Device for daisy-chaining to the to the expansion ports of the main control and monitoring unit.

Door wall-mounted biometric reader for face recognition with multi-format RFID reader.

The dual multi-format reader can read cards and chips and is also compatible with mobile phones equipped with NFC technology.

Keyboard with built-in card reader (EM format) for RAMOS ACS access system.

Desktop USB card reader for RAMOS ACS access and monitoring system.

Electronic handle for RAMOS ACS access and monitoring system.

Electronic handle with built-in card reader for RAMOS ACS access and monitoring system.

A hub for connecting two handles to a single RDU access unit.

Electromagnetic lock (small) for the RAMOS ACS access and monitoring system.

Electromagnetic lock (large and waterproof) for the RAMOS ACS access and monitoring system.

Identification cards and tags for the RAMOS ACS access and monitoring system.

Serves as a monitoring element that detects the opening of the cabinet.

Temperature sensor with 3 m long cable and RJ12 connector.

Temperature sensor with 3 m cable and RJ12 connector.

Temperature and humidity sensor with 2 RJ12 connectors and 3 m cable.

1-Wire outdoor temperature sensor with RJ12 connector and 3 m cable.

PowerBox - remote switching of external devices up to 230 V/10 A with voltage detection function.

PIR motion detector for RAMOS Mini main monitoring unit

Optical smoke detector with relay output for RAMOS Mini

Flooding detector without power source.

Universal power adapter 5V DC for RAMOS Mini.

A 1-phase or 3-phase inline power meter with a backlit display is suitable for measuring parameters at the input of the basic power supply panel.

The sensor detects the temperature and humidity inside the cabinet. It connects using a 2.5 m cable directly to a monitored or managed PDU.

Output power cables are used to transmit electrical energy between the power panel and the IT equipment located inside the cabinet.

1-phase 16A monitored and managed power panels are supplied without an input power cable.

The retention sleeve reduces the risk of the power cord being accidentally pulled out.

For vertical installations of power panels in cabinets, it is necessary to order the appropriate brackets for the basic, monitored or managed PDU, which is not included in the package.

Hub for connecting 2 sensors to a 1-Wire bus